Rack Mounts · NVIDIA GB10
Rack your DGX Spark, or any GB10, in 2U
One mount fits all eight GB10 machines: NVIDIA, ASUS, Dell, HP, Lenovo, MSI, Gigabyte and Acer. Single or side-by-side for a two-node cluster, vented for airflow, 3D printed in the USA and shipped to all 50 states in 2–3 business days.
3D printed
NVIDIA GB10 / DGX Spark desktop stand for 4 units — fits all 8 GB10 models
$72.99
10″ rack · 2U
10" 2U NVIDIA GB10 / DGX Spark rack mount — fits all 8 GB10 models
$58.99
19″ rack · 2U
19" 2U NVIDIA GB10 / DGX Spark rack mount — fits all 8 GB10 models
$66.99
19″ rack · 2U · 2 devices side by side
19" 2U dual NVIDIA GB10 / DGX Spark rack mount — fits all 8 GB10 models
$104.99
Need a different gap, three units, or a 10″ dual? Design it in the generator. Pick “Any GB10, universal fit”.
Every GB10 it fits
Sizes from each maker’s published specs. The mount’s pocket is 153 × 153 × 57 mm.
Built for heat
Open front window, diamond-vented floor, and in the dual mount a vented centre spine and inner walls so the two units don't cook each other.
Cluster-ready
The 40 mm gap leaves room to route the ConnectX-7 / QSFP cable between two units, and zip-tie slots in the floor hold everything in place.
Faster and cheaper than metal
Imported steel GB10 kits cost more than $170, with 7–8 week lead times or import tariffs. Ours ships from San Diego in 2–3 business days.
FAQ
Does one mount really fit every GB10 model?+
Yes. The pocket is sized to the largest published dimensions across all eight (151 × 151 mm footprint, up to 54.5 mm tall) plus clearance, so the boxes that run a little bigger (MSI, HP, ASUS) fit as well as the DGX Spark. Each unit rests on a vented floor and is held with zip ties through the floor slots.
Why 2U and not 1U?+
Every GB10 box is 50–55 mm tall and 1U is 44.45 mm, so 2U is the smallest height that fits. Anything sold as 1U for these has to leave the box sticking out of the rack space.
How much space is between the two units in the dual mount?+
40 mm, with a vented centre spine, vented inner walls and an open faceplate in front of the gap, so air moves through and you have room to route the ConnectX-7 cable between the units. Need more? Our generator lets you set the gap up to 120 mm.
What material should I choose?+
PETG is our default. GB10 boxes run warm, so choose ASA if the rack is hot or the mount sits in exhaust air. The quote page shows what's in stock.
How does a 19" mount print on a desktop-size printer?+
The dual mount prints as two halves that slide together on a tongue-and-groove seam and clamp with three M4 through-bolts across the centre spine; the nuts sit in printed pockets, so it assembles with one hex key. The single 19" mount prints as a centre tray plus two bolt-on rack ears.