3D Printing › Rack Mounts › All GB10 AI mini PCs: NVIDIA DGX Spark, ASUS Ascent GX10, Dell Pro Max with GB10, HP ZGX Nano G1n, Lenovo ThinkStation PGX, MSI EdgeXpert, Gigabyte AI TOP ATOM, Acer Veriton GN100

19″ rack · 2U · 2 devices side by side

19" 2U dual NVIDIA GB10 / DGX Spark rack mount — fits all 8 GB10 models

Fits: All GB10 AI mini PCs: NVIDIA DGX Spark, ASUS Ascent GX10, Dell Pro Max with GB10, HP ZGX Nano G1n, Lenovo ThinkStation PGX, MSI EdgeXpert, Gigabyte AI TOP ATOM, Acer Veriton GN100

$104.99 printed in PETG · + shipping & tax

9 h print317 gShips Thu Nov 19–Fri Nov 20 · USPS about $8.21Fits, or we reprint free

Add your own text — free (up to 10 characters)

Next: pick material, color and quantity (10% off 3+, 15% off 5+, 20% off 10+), then check out. 3D printed in the USA (San Diego, California) and shipped to all 50 states. You pay the actual shipping cost: USPS for small parts, FedEx for larger ones, priced for your ZIP before you pay. Doesn’t fit? Send a photo within 30 days and we reprint it free (terms).

PETG by default: tough and fine for a warm network closet. ASA for hot racks or exhaust air.
Standard EIA-310 rack spacing (1U = 44.45 mm); use your rack’s cage-nut screws.
Prints as two halves: a tongue-and-groove seam lines them up and three M4 bolts clamp the vented centre spine, with the nuts held in printed pockets (hex key from one side only).
Diamond vent mesh in the air slots between the devices.

Photos of the real part

Unedited photos of this part after printing, with the devices in place.

19" 2U dual NVIDIA GB10 / DGX Spark rack mount — fits all 8 GB10 models, printed, photo 1

About this part

Holds two GB10 AI mini PCs side by side with a 40 mm vented gap for airflow and the ConnectX-7 cluster cable. One pocket sized to the published dimensions of every GB10 model (up to 151 × 151 × 54.5 mm), so it fits DGX Spark, ASUS GX10, Dell, HP, Lenovo, MSI, Gigabyte and Acer. Open front, vented floor, zip-tie slots.

Different device or size?

Our generator designs a mount for any device from its width, height and depth, and prices it in about 30 seconds.

Design a custom mount →